MITSUBISHI TENSEI 1K PRO ORANGE WOOD SHAFT
You've seen Red, Blue and White Mitsubishi profiles, so what is Orange? Mitsubishi shafts with Orange indicate the shaft is counterbalanced -- meaning additional weight and material is concentrated in the handle to increase activity near the tip side for more club head speed. You'll only see Orange used in TENSEI profiles.
The low launch, low spin TENSEI 1K Pro Orange achieves counterbalance by using tungsten powder in the handle section and also features super-premium 1K carbon fiber in the handle to decrease ovalization and deformation under load. This increases stability and also makes the shaft feel better. The shaft is further fortified through the use of high-modulus MR70 material tip side and is finished off with Mitsubishi's breakthrough Xlink Tech Resin System to drastically increase carbon fiber volume for better feel without sacrificing any of the shaft's strength.
Key Features Include:
- Tungsten powder to create counterbalance for increased club head speed
- Super-premium 1K carbon fiber used in handle for increased stability
- MR70 for strength
- Xlink Tech Resin System drives carbon fiber volume way up for better feel without sacrificing strength or durability
Who should play it? Anyone who likes the feel of counterbalance who is also looking for a bit of speed.
DISCLAIMER: CANNOT SHIP TO THE FOLLOWING COUNTRIES
- SOUTHEAST ASIAĀ
- JAPAN
- TAIWAN
- HONG KONG
- MACAU
- CHINA
- KOREA
- AUSTRALIA
- NEW ZEALAND
- INDIA
SPECIFICATIONS
| Shaft | Flex | Length | Weight | Tip OD | Tip Length | Butt OD | Torque | Kick Point |
|---|---|---|---|---|---|---|---|---|
| 50 | R | 46 | 54 | 0.335 | 3 | 0.598 | 3.9 | High |
| 50 | S | 46 | 56 | 0.335 | 3 | 0.602 | 3.9 | High |
| 50 | X | 46 | 58 | 0.335 | 3 | 0.604 | 3.8 | High |
| 50 | TX | 46 | 59 | 0.335 | 3 | 0.604 | 3.8 | High |
| 60 | R | 46 | 66 | 0.335 | 3 | 0.604 | 3.0 | High |
| 60 | S | 46 | 68 | 0.335 | 3 | 0.604 | 3.0 | High |
| 60 | X | 46 | 70 | 0.335 | 3 | 0.610 | 3.0 | High |
| 60 | TX | 46 | 71 | 0.335 | 3 | 0.610 | 3.0 | High |
| 70 | S | 46 | 77 | 0.335 | 3 | 0.606 | 2.7 | High |
| 70 | X | 46 | 79 | 0.335 | 3 | 0.610 | 2.7 | High |
| 70 | TX | 46 | 80 | 0.335 | 3 | 0.610 | 2.7 | High |
| 80 | S | 46 | 85 | 0.335 | 3 | 0.604 | 2.5 | High |
| 80 | X | 46 | 87 | 0.335 | 3 | 0.606 | 2.4 | High |
| 80 | TX | 46 | 88 | 0.335 | 3 | 0.606 | 2.4 | High |
TIP TRIMMING GUIDE
| Driver | 3 Wood | 5 Wood | 7 Wood | 9 Wood |
|---|---|---|---|---|
| 0" | 0.5" | 0.75" | 1.0" | 1.0" |
Original: $360.00
-65%$360.00
$126.00Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
You've seen Red, Blue and White Mitsubishi profiles, so what is Orange? Mitsubishi shafts with Orange indicate the shaft is counterbalanced -- meaning additional weight and material is concentrated in the handle to increase activity near the tip side for more club head speed. You'll only see Orange used in TENSEI profiles.
The low launch, low spin TENSEI 1K Pro Orange achieves counterbalance by using tungsten powder in the handle section and also features super-premium 1K carbon fiber in the handle to decrease ovalization and deformation under load. This increases stability and also makes the shaft feel better. The shaft is further fortified through the use of high-modulus MR70 material tip side and is finished off with Mitsubishi's breakthrough Xlink Tech Resin System to drastically increase carbon fiber volume for better feel without sacrificing any of the shaft's strength.
Key Features Include:
- Tungsten powder to create counterbalance for increased club head speed
- Super-premium 1K carbon fiber used in handle for increased stability
- MR70 for strength
- Xlink Tech Resin System drives carbon fiber volume way up for better feel without sacrificing strength or durability
Who should play it? Anyone who likes the feel of counterbalance who is also looking for a bit of speed.
DISCLAIMER: CANNOT SHIP TO THE FOLLOWING COUNTRIES
- SOUTHEAST ASIAĀ
- JAPAN
- TAIWAN
- HONG KONG
- MACAU
- CHINA
- KOREA
- AUSTRALIA
- NEW ZEALAND
- INDIA
SPECIFICATIONS
| Shaft | Flex | Length | Weight | Tip OD | Tip Length | Butt OD | Torque | Kick Point |
|---|---|---|---|---|---|---|---|---|
| 50 | R | 46 | 54 | 0.335 | 3 | 0.598 | 3.9 | High |
| 50 | S | 46 | 56 | 0.335 | 3 | 0.602 | 3.9 | High |
| 50 | X | 46 | 58 | 0.335 | 3 | 0.604 | 3.8 | High |
| 50 | TX | 46 | 59 | 0.335 | 3 | 0.604 | 3.8 | High |
| 60 | R | 46 | 66 | 0.335 | 3 | 0.604 | 3.0 | High |
| 60 | S | 46 | 68 | 0.335 | 3 | 0.604 | 3.0 | High |
| 60 | X | 46 | 70 | 0.335 | 3 | 0.610 | 3.0 | High |
| 60 | TX | 46 | 71 | 0.335 | 3 | 0.610 | 3.0 | High |
| 70 | S | 46 | 77 | 0.335 | 3 | 0.606 | 2.7 | High |
| 70 | X | 46 | 79 | 0.335 | 3 | 0.610 | 2.7 | High |
| 70 | TX | 46 | 80 | 0.335 | 3 | 0.610 | 2.7 | High |
| 80 | S | 46 | 85 | 0.335 | 3 | 0.604 | 2.5 | High |
| 80 | X | 46 | 87 | 0.335 | 3 | 0.606 | 2.4 | High |
| 80 | TX | 46 | 88 | 0.335 | 3 | 0.606 | 2.4 | High |
TIP TRIMMING GUIDE
| Driver | 3 Wood | 5 Wood | 7 Wood | 9 Wood |
|---|---|---|---|---|
| 0" | 0.5" | 0.75" | 1.0" | 1.0" |
